Product Search:
SHEET STEEL: All parts made from prime grade mild cold rolled sheet steel free from surfaceimperfection, and capable of taking a high grade enamel finish.HINGES: 0.074" thick, 2" high, double spun, full loop, tight pin, five-knuckle hinges, projectionwelded to door frame and securely fastened to the door with 2 steel rivets. Doors over 42" highshall have three hinges; all other doors shall have two hinges.~ Also available with continuoushinge generally standard with but not restricted to single point latch option.FINISHING: Chemically pretreated metal with a six stage cleaning phosphatizing and metalpreparation process. Finish coat shall be baked on powder coated enamel. Select colors frommanufacturer's minimum standard 25 colors. All lockers shall be painted inside and outside withthe same color.EQUIPMENT: Coat hooks and coat rods are zinc plated. Truss fin head bolts and hex nuts arezinc coated.FABRICATION GENERAL CONSTRUCTION: Built on the unit principle - each locker shall have an individual door and frame, individual top, bottom, back and shelves with common intermediate uprights separating compartments. Lockers shall be fabricated square, rigid and without warp.Doors shall be flat and free of distortion.DOOR FRAME: All door frame members to be not less than 16 gauge formed to a channelshape. Vertical members to have an additional flange to provide a continuous door strike.Intermembering parts to be mortised and tenoned and elect rically welded together in a rigidassembly capable of resisting strains. Cross frame members of 16 gauge channel shapesincluding intermediate cross frame on double and triple tier lockers shall be securely welded tovertical framing members to ensure rigidity.
Item #
WS-120591
Shipping Weight
Our Price:
$118.97
BODY: Bolt spacing in locker body construction not to exceed 9" o.c. All locker body componentsshall be made of cold rolled steel specially formed for added strength and rigidity and to ensuretight joints at fastening points. Tops & bottoms shall be 24 gauge with three sides formed 90degrees and the front offset formed to be flush with the horizontal frame member. Shelves shallbe 24 gauge with four sides formed to 90 degrees, the front edge shall have a second bend.Backs & sides shall be 24 gauge.DOORS: Doors 30" or higher shall be formed from one piece 14 gauge cold rolled sheet steel.Formations shall consist of a full channel shape on the lock side of adequate depth to fullyconceal the lock bar, channel formation on the hinge side, and rig ht angle formations across thetop and bottom. Doors over 15" wide x 60" or 72" high shall have a 3" wide 20 gauge full heightreinforcing pan welded to the inside face of the door on 6" centers.INTERIOR EQUIPMENT: Single-tier lockers 60" or higher shall have a hat shelf locatedapproximately 9" below the top of locker; if less than 18" deep, locker shall have three single -prong hooks and one double-prong ceiling hook. Single tier lockers 18" or more in depth shallhave a coat rod instead of a ceiling hook. 30" & 36" high lockers shall have three single -prongwall hooks and one double-prong ceiling hook. Hooks to be attached with two bolts per hook. 20"& 24" high lockers to have three wall hooks for 12" wide, and four wall hooks for 15" wide andwider.